Rotary Evaporator With Vacuum Pump And Chiller

1. Replace the oil seal regularly: According to the frequency of use and the model of vacuum pump, check and replace the oil seal regularly to avoid leakage and performance degradation.

2. Clean the filter: Clean or replace the filter of the vacuum pump regularly to prevent dust and impurities from entering the pump and affecting the vacuum degree and working effect.

3. Check the seals: Check the seals of the vacuum pump regularly, such as O-rings and gaskets, to ensure that they are intact to prevent leakage.

4. Specified operating pressure range: Use the vacuum pump strictly according to the operating instructions and the specified operating pressure range, so as to avoid overload operation or excessive pressure damage to the pump.

1. Clean the cooler: Regularly clean the water pipes and fins of the cooler to remove accumulated dirt and impurities and maintain good cooling effect.

2. Check the water quality: Check the quality of cooling water regularly to ensure that there are no impurities and corrosive substances in the water, and replace or treat the cooling water in time.

3. Check the water pipe connection: Regularly check whether the water pipe connection of the cooler is fastened to prevent water leakage and leakage.

4. Maintenance of cooling system: Check the working state of cooling system regularly to ensure the normal operation of water pump, sink and other equipment and the normal use of cooler.

תגיות פופולריות: